64GB DDR4-3200 (2 x 32GB) Kingston Fury Beast CL16

Kingston Fury Beast Desktop 64GB DDR4-3200 (2 x 32GB), 1.2V, CL16 - KF432C16BBK2/64

Kingston FURY KF432C16BBK2/64 is a kit of two 4G x 64-bit (32GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0*. Total kit capacity is 64GB. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-20-20 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

FEATURES:

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.34” (34mm), w/heatsink

FACTORY TIMING PARAMETERS:

• Default (JEDEC): DDR4-2400 CL17-17-17 @ 1.2V
• XMP Profile #1*: DDR4-3200 CL16-20-20 @ 1.35V
• XMP Profile #2*: DDR4-3000 CL16-19-19 @ 1.35V

SPECIFICATIONS:

• CL(IDD) 17 cycles
• Row Cycle Time (tRCmin) 45.75ns(min.)
• Refresh to Active/Refresh Command Time (tRFCmin) 350ns(min.)
• Row Active Time (tRASmin) 32ns(min.)
• UL Rating 94 V - 0
• Operating Temperature 0C to +85C
• Storage Temperature -55C to +100C

NOTE:

• *FURY Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. FURY Plug N Play DDR4 products support XMP 2.0 specifications, so overclocking can also be achieved by enabling the built-in XMP profile.